English
 |
| Quantity: | |
|---|---|
Flange diameter [mm] | 630 | ||
Spool type | DIN 46397 | ||
Overall width [mm] | 475 | ||
Useful width [mm] | 400 | ||
Bore diameter [mm] | 127 Tapered 22.5° | ||
Barrel diameter [mm] | 355 | ||
Maximum gross weight [kg] | 600 | ||
N° of spool per unit | 2 reels | ||
Dancer | Controlled by pneumatic cylinder | ||
Individual wire diameter [mm] | 0,05-1,40 | ||
Multi wire cross section [mm2] | 0,6-6,00 | ||
A.C. motor power [kW] | 2x1.5 KW Brake/ Encoder/ Ventilator | ||
Adaptors included | 1 pair | ||
Maximum rotation speed [rpm] | 269 | ||
Maximum linear speed [m/min] | 300 | ||
Guide roller diameter [mm] | 80 | ||
Air pressure to be guarantee from the factory network [kPa] | 500-700 | ||
The pay-off unit is composed of a steel frame with cantilever shafts that hold the reels. The shafts are driven by AC motors and controlled by electrical inverters ensuring high precisionin tension control.
The synchronization between the pay-off unit and the double twist machine, is achieved by a pneumaticaly controlled dancer for each reel. The unit includes a wire break switch on the dancer. The electrical equipment is also installed on the steel frame.
Flange diameter [mm] | 630 | ||
Spool type | DIN 46397 | ||
Overall width [mm] | 475 | ||
Useful width [mm] | 400 | ||
Bore diameter [mm] | 127 Tapered 22.5° | ||
Barrel diameter [mm] | 355 | ||
Maximum gross weight [kg] | 600 | ||
N° of spool per unit | 2 reels | ||
Dancer | Controlled by pneumatic cylinder | ||
Individual wire diameter [mm] | 0,05-1,40 | ||
Multi wire cross section [mm2] | 0,6-6,00 | ||
A.C. motor power [kW] | 2x1.5 KW Brake/ Encoder/ Ventilator | ||
Adaptors included | 1 pair | ||
Maximum rotation speed [rpm] | 269 | ||
Maximum linear speed [m/min] | 300 | ||
Guide roller diameter [mm] | 80 | ||
Air pressure to be guarantee from the factory network [kPa] | 500-700 | ||
The pay-off unit is composed of a steel frame with cantilever shafts that hold the reels. The shafts are driven by AC motors and controlled by electrical inverters ensuring high precisionin tension control.
The synchronization between the pay-off unit and the double twist machine, is achieved by a pneumaticaly controlled dancer for each reel. The unit includes a wire break switch on the dancer. The electrical equipment is also installed on the steel frame.
